DBX ZonePro 640m, 641m
 DBX ZonePro 640m - Call for pricing - Processor with face
DBX ZonePro 641m - Call for pricing - Processor by remote
Downloads
The ZonePRO 640m/641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.
The 640m/641m features a total of six inputs and four outputs.
Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs.
Hardware-controlled microphone gain allows adjustment of microphone gain per channel.
The 640m/641m device has a pre-configured architecture with input processing, a central matrix and output processing.
Two input insert positions and one output insert position allow channel-specific insert processing to be configured.
AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.
A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where aditional output zones are required.
The front panel of the 640m features comprehensive signal metering, an informative LCD display and user-specified front panel control.
The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.
Additional system control is offered in the form of optional Zone Controllers.
This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.
All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable.
ZonePRO Designer – the configuration, control and monitoring software for the ZonePRO family of devices – offers control of the ZonePRO 640m/641m via Ethernet or RS-232.
The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 640m/641m.
Features
- 6 Inputs / 4 Outputs
- 4 Balanced Mic/Line Inputs
- 2 Unbalanced, Mono-Summed RCA Input Pairs
- Microphone Gain on Channels 1-4
- Pre-Configured Architecture
- Two Configurable Input Insert Positions
- One Configurable Output Insert Position
- AutoWarmth® per Output Zone
- Link Bus
- Comprehensive Signal Metering (640m)
- Front Panel LCD (640m)
- User-Specified Front Panel Control (640m)
- Optional ZC Controllers
- Ethernet Control
- Serial Control
- Third Party Control
- Wizard-Driven Configuration
| Specifications |
| Analog Inputs |
| Analog Inputs | 6 Total; (4) Switchable Mic or Line, (2) Unbalanced, Mono-Summed RCA Input Pairs |
| Input Type | Euroblock (Mic/Line), RCA (Source) |
| Input Impedance (bal./unbal.) | >50 kΩ / >25 kΩ |
| Max. Input Level | +20 dBu Mic/Line; +12 dBu RCA |
| Input CMRR | >40 dB, typ >55 dB @ 1 kHz |
| Mic Pre Gain | 30 to 60 dB |
| Mic EIN | <-118 dBu, 22Hz-22kHz, 150 Ω |
| Phantom Power | 15 VDC |
| Analog Outputs |
| Analog Outputs | 4 Total |
| Output Type | Electronically Balanced, RF Filtered Euroblock |
| Output Impedance (bal./unbal.) | 120 Ω / 60 Ω |
| Max. Output Level | +20 dBu |
| A/D Performance |
| Type | dbx Type IV™ Conversion System |
| Dynamic Range Line (A-weighted/unweighted) | >113 dB / >110 dB |
| Type IV Dynamic Range (A-weighted/unweighted) | >119 dB / >117 dB |
| Sample Rate | 48 kHz |
| D/A Performance |
| Dynamic Range (A-weighted/unweighted) | 112 dB / 109 dB |
| System Performance |
| Dynamic Range (A-weighted/unweighted) | >109 dB / >106 dB |
| THD+Noise @ 1 kHz | 0.003% typ. @ +4 dBu, 0 dB gain |
| Frequency Response (±0.5dB) | 20 Hz–20 kHz |
| Interchannel Crosstalk | >80 dB |
| Propagation Delay | 0.6 msec |
| Operating Voltage | 100-230 VAC, 50/60 Hz |
| Power Requirements | 29 Watts |
| BTU Rating | <92.13 BTU |
| Physical |
| Weight | 2.74 kg (6.05 lbs) |
| Dimensions (HxWxD) | 4.45 x 48.3 x 19.7 cm (1.75" x 19" x 7.75") |
| Safety Certifications | UL 60065, IEC 60065, E 60065, EN 55013 |
|
DBX ZonePro 640m Cut Sheet (pdf)