Electro-Voice DC One
 DC One - Call for pricing - Loudspeaker Processor
Downloads
Based on a two-in-six-out topology, the DC-One is designed primarily for users of small- to medium-sized sound systems in both mobile and installed applications.
While the unit is an all-new development based on a powerful SHARC processor, it is 100% compatible with all settings from other Electro-Voice signal processors,
including the Dx38—the best choice for achieving maximum performance with an EV loudspeaker system.
A large part of DC-One’s development was aimed towards ensuring users can easily and fully utilize its serious digital horsepower and high-end audio performance.
Though free PC-Editor software is available, the DC-One can easily be operated via the front panel.
Direct access buttons, six predefined configuration modes (one being free configuration), straightforward output delay settings, and true professional metering all allow for safe operation.
DC-One’s unique “front-panel-access-control” allows the user to select a personal library of accessible presets (out of 60 factory and 20 user presets).
In addition, the user can determine which individual parameters in each preset are locked (e.g. factory predefined output parameters) or editable (e.g. master EQ or delay settings).
The DC-One has a 1U 19" chassis that is deep enough to match typical amplifier depths, a front panel USB connector for the PC-Editor,
and accepts either analogue or digital (AES-EBU) input signals; a 6-dB input pad is available.
The RS232 on the rear also provides eight contact closures for preset changes, or allows two units to be linked for larger systems.
The PC-Editor software, as well as firmware updates allowing additional functions, will be available on www.electrovoice.com.
Features
- USB connection for advanced editing and control with DC-One Editor software
- Reliable, accurate input metering assures proper gain staging
- Output metering includes gain reduction and configuration mode indicators
- Built in selectable 6 dB pad for system input protection
- Two analog inputs, Six analog outputs, Digital (AES3) inputs, Parallel/Thru audio connections
- RS-232 port for Master/Slave connections or GPI preset recall
| Specifications |
| General |
| Mains Voltage | 100-240 VAC 50-60 Hz | Power Consumption | 25W |
| Audio |
| Analog Inputs | 2x XLR IN, elec. balanced
2x XLR THRU OUT, elec. balanced | Digital Inputs | 1x XLR AES/EBU IN |
| Input Voltage (nom./max.) | +4 dBu (1.23V) / +21 dBu (8.7V) | Input Impedance | 10 kΩ |
| Input CMRR | -80 dB @ 1 kHz (typical) | Outputs | 6x XLR OUT, electronically balanced |
| Output Voltage (nom./max.) | +4 dBu (1.23V) / +21 dBu (8.7V) | Output Impedance | 50 Ω |
| Current Conversion | 24-Bit Sigma-Delta | Frequency Response (±0.5dB) | 10 Hz–22 kHz |
| THD+Noise | < 0.01% | Dynamic Range (unweighted) | 111 dB |
| Interfaces |
| USB | USB-B, front panel (PC Interface) | 9-pin DSUB | Software Configurable for GPI Preset Recall or Master/Slave |
| Signal Processing |
| Sample Rate | 48 kHz | Data Format | 24-bit |
| Internal Processing | 32-bit Floating Point | | |
| Physical |
| Dimensions (HxWxD) | 35.6 x 48.3 x 4.45 cm
(14.0" x 19.0" x 1.75") | Weight | 4.6 kg (10.1 lbs) |
|
DC One Brochure (pdf)