Products

Peavey XR 8600

XR 8600 - Call for pricing - 2x600 Watt Console w/ FLS - 00513220

Downloads

XR 8300/8600 Manual (pdf)

The XR 8600 features new improved low noise mic preamps, multi point clip sampling and a new subsonic filter to prevent low frequency power robbing. New graphic equalizers have multi-Q bandwidth to allow some filters to perform feedback control while others perform tone control and have Peavey’s patented FLS (Feedback Locating System).

Features

2x600 watts per channel at 4 ohms
8 improved, low-noise mic preamps
10 line inputs
48V phantom power
3-band EQ, monitor send and effects send on each channel
25 dB pad on channels 1-6
Signal and Clip indicator on each channel
Dual Main or Main/Mon power amp mode switch
Dedicated 7-band graphic for mains and monitors with FLS®
DDT™ speaker protection
DSP based effects with parameter control
Channel mute switch
Rugged plastic case

Specifications
Operating Levels
Mic Input Sensitivity w/ pad	-34 to +14 dBu XLR
Line Input Sensitivity w/ pad	-2 to +46 dBu TRS
Tape Input	-26 to +21 dBu RCA
TRS Output (nom./max.)	+4 dBu / +21 dBu
RCA Output (nom./max.)	-10 dBu / +10 dBu
Gain
Mic Input	60 dB
Line Input	30 dB
Frequency Response (+0/-1dB)
To Main Output	20 Hz–20 kHz
To Power Amp Output	40 Hz–20 kHz
Distortion
THD @ 20Hz–20kHz	< 0.01%
THD @ 1 kHz	< 0.005% typ.
Common Mode Rejection
CMRR @ 1 kHz	60 dB
Crosstalk @ 20Hz–20kHz
Adjacent Channel	> 80 dB
Left to Right Outputs	> 70 dB
Hum and Noise (22Hz–22kHz unweighted)
Mic EIN	-122 dBu
Residual Noise - Main	-102 dB
Residual Noise - Monitor	-98 dB
S/N Ratio	> 90 dB
Connection Impedances
Mic Inputs	2 kΩ
Line Inputs	22 kΩ
Outputs	600 Ω
Equalization
Max. Boost/Cut	± 12 dB
Filter Frequencies	80, 250, 500, 1k, 2k, 4k, 10k Hz
Physical
Dimensions (HxWxD)	30.5 x 53.3 x 31.4 cm (12.0" x 21.0" x 12.4")
Weight	18.9 kg (41.5 lbs)
Power Amplifier Specifications
Frequency Response (+0/-1dB)	20 Hz–20 kHz
THD @ 1 kHz	< 0.01%
DDT Dynamic Range	> 26 dB
DDT Max. Distortion for 6dB overload	< 0.5% THD
Hum and Noise	97 dB
Rated Power	600W into 4Ω / 475W into 8Ω
Input Sensitivity	1.5 Vrms
Input Impedance	8.25 kΩ
Damping Factor @ 1 kHz, 4Ω	> 100
Power Requirement	120V AC, 60 Hz or 220-240V AC, 50/60 Hz; 500 W

For pricing options and packages, contact us at
800.937.9021 Ext - 109, Or

Peavey Mixers

A veteran and minority owned SDB Certified Business.
Home Products Audio Video Projection & Screens Presentation Lutron Lighting & Shading Rentals & Rates Turnkey Packages Services Rentals & Rates Turnkey Packages Installation Showcase Maintenance Computer Aided Modeling Training & Seminars Contact Info Contact Us Feedback Site Map Corporate