ENPAC Industrial Fabric Chemical Compatibility Guide

Chemical Environmental Resistance for
Stinger Yellow Jacket, Dripillow Berm, Spillpad, Spillpal & Prowler Pool PVC Fabric

PDF Format

R - Recommended for use

NR - Not recommended

NA - Not tested

F - Failed

Ratings are based on visual physical examination of sample after removal from immersion in the test chemical at room temperature. Results represent ability of the material to retain its performance properties when in contact with test chemical.

This report is offered as a guide and was developed from information, which, to the best of ENPAC's knowledge, was reliable and accurate. Due to variables and conditions of application beyond ENPAC's control, none of the data shown on this guide is to be construed as a guarantee, expressed or implied. ENPAC Corporation assumes no responsibility, obligation, or liability in conjunction with the use or misuse of the information.

Chemical Environmental Resistance for Stinger Berms

PDF Format

The data shown are the result of laboratory tests and are intended to serve only as a guide. No performance warranty is intended or implied. The degree of chemical attack on any material is governed by the conditions under which it is exposed. Exposure time, temperature, and size of the area of exposure usually varies considerably in application, therefore, this table is given and accepted at the user's risk. Confirmation of the validity and suitability in specific cases should be obtained. When considering containment berms for specific applications, it is suggested that a fabric sample be tested in actual service before specification. Where impractical, tests should be devised which simulate actual service conditions as closely as possible.

A - Fluid has little or no effect.

B - Fluid has minor to moderate effect.

C - Fluid has severe effect.

T - No data / likely to be acceptable.

X - No data / not likely to be acceptable.

Ratings are based on visual physical examination of samples after removal from the test chemical after the fabric samples were immersed for 28 days at room temperature. Results represent ability of material to retain its performance properties when in contact with the indicated chemical.

This report is offered as a guide and was developed from information, which, to the best of ENPAC's knowledge, was reliable and accurate. Due to variables and conditions of application beyond ENPAC's control, none of the data shown in this guide is to be construed as a guarantee, expressed or implied. ENPAC Corporation assumes no responsibility, obligation, or liability in conjunction with the use or misuse of the information.