55 Gallon Marine Spill Kit
37" x 24" - 8/pallet - 80 lbs./kit - absorbs:30-45 gal
This kit meets U.S. regulations requiring inland oil barges to carry equipment and supplies to remove on-deck spills of at least one barrel
which may occur during cargo transfer (CFR, Vol. 58, No. 244, Subsection 155.215) and for vessels carrying oil as a secondary cargo to contain
and remove a half-barrel spill (Subsection 15.220).
Kit Contains:
- 10 - 18" x 18" pads
- 5 - 2" x 10' socks
- 5 - ¾-cu ft loose-filled bags
- 1 - folding shovel
- 1 - scoop
- 1 - 3.5-gallon bucket
- 2 - 1-liter container of emulsifying soap
- 2 - Tyvek suits
- 2 - pairs nitrile gloves
- 2 - pairs safety goggles
- 2 - dust masks
- 1 - disposal bag
- 1 - Liter Granular Plug It
- Safe and nontoxic - poses no threat to plant or animal life.
- Licensed by the State of California Environmental Protection Agency for use in its waters
- Recovery is simple: sweep, vacuum or shovel up
- Sphag Sorb® is light. This has been an advantage because it will spread easier. Also, more product can be handled by workers because of its weight.
- Quickly absorbs contaminant
- Absorbs any hydrocarbon including fuel oil, crude oil and industrial chemicals such as styrene, toluene, and benzene
- Effective on land or water - many of the competitors can only be used on land
- Encapsulates the waste - the waste does not leak out, even under pressure
- Easier cleanup - no special training or equipment and no mess left behind
- Sphag Sorb® meets the solidification requirements for landfills at a lower ratio than other absorbents
- Sphag Sorb® is incinerable
- Years later, areas are healthy and show no evidence of the spill.
|