FROTH-PAK™ 160 Slow Rise Kit
Low pressure foam for blind cavity and abandoned pipe filling. 160 Board Feet/13.3 Cubic Feet.
FROTH-PAK can be used to fill cavities, wall and floor penetrations, cracks and expansion joints, cold storage facilities and refrigerated trailers.
FROTH-PAK can also be used to repair spray-applied polyurethane roofs (2.75# density) or damaged insulation boards.
It is ideal for filling pitch pockets, low ponding water areas on roof decks and fabricating on-site cant strips.
FROTH-PAK can be used in either interior or exterior industrial, commercial, institutional and residential settings.
If used in an exterior setting, a coating must be applied for UV protection.
| Typical FROTH-PAK Applications |
Agriculture
- Grain Storage Bin Sealant
- Silo Sealant
- Light Control in Chicken Houses
|
Cold Storage
- Floor Seams
- Fluted Roof Decks
- Walls/Wall Repair
|
HVAC
- HVAC Duct Sealant
- Geothermal Pipe Insulator
|
Plumbing
- Structural Support
- Around Copper or PVC Lines
- Stabilizing Pipe Insulation
|
Pool and Spa
- Sound Dampening
- Insulation/Insulation Repair
|
Theatrical
- Stage & Movie Sets
- Floats
- Special Effects
|
Roofing
- Filling Pitch Pockets
- Air-sealing Roof/Walls Joints
- Air-seal around HVAC Penetrations
- Fabricate On-site Cant Strips
- Level Low Ponding Water Areas on Roof Deck
- Repair Spray-applied Polyurethane Roofs (Froth-Pak 115 Kit - 2.75# density)
|
Transportation Vehicles
- Insulation
- Sound Dampening
- Structural Support
- Vibration Control
- Sealing - Air, Water, Dust
- Surface Protection
- Flotation
|
Worldwide Uses(23KB PDF)
Find additional FROTH-PAK application ideas
|
Product Information
| Product | Part Number | Foam Density (Pcf) | Yield | Contents |
| FROTH-PAK 160 | 157882 | 2.25 Slow Rise | 160 Board Feet 13.3 Cubic Feet |
- One Iso (A) cylinder; one Polyol (B) cylinder
- Six Cone white spray nozzles (259219) 4 GG white spray nozzles (259216)
- 9 ft. gun hose assembly
- One petroleun jelly packet
- One instruction sheet
|
|