FROTH-PAK™ 180 Kit
FROTH-PAK™ 180 Kit is a two-component spray applied polyurethane foam.
Unlike one-component foam which uses moisture as a curing agent, FROTH-PAK is a chemically cured foam.
This reduces curing time significantly. FROTH-PAK dispenses, expands and becomes tack free in seconds.
FROTH-PAK will skin over in 30-40 seconds and be completely cured in less than one minute.
FROTH-PAK 180 is typically used as a foam insulating sealant to fill cavities, wall and floor penetrations, cracks and expansion joints, cold storage facilities and refrigerated trailers.
FROTH-PAK 180 is also commonly used to repair spray-applied polyurethane roofs, test cut areas, or damaged insulation boards.
It is also ideal for filling pitch pockets, low ponding water areas on roof decks and fabricating on-site cant strips.
Product Features:
- Temperature indicator to assure maximum product performance
- Metal carrying handle and banding around tanks secure the kit for ease of use outside the box
- INSTA-FLO™ gun allows better foam dispensing control and precise monitoring
- Pre-attached, longer, flexible hoses for quicker start-up and greater user mobility
- Clear hoses to monitor product usage
- Patented anti-crossover nozzle eliminates chemical crossover
Note: (INSTA-FLO gun/hose assembly sold separately for Tank Only FROTH-PAK)
| Typical FROTH-PAK Applications |
Agriculture
- Grain Storage Bin Sealant
- Silo Sealant
- Light Control in Chicken Houses
|
Cold Storage
- Floor Seams
- Fluted Roof Decks
- Walls/Wall Repair
|
HVAC
- HVAC Duct Sealant
- Geothermal Pipe Insulator
|
Plumbing
- Structural Support
- Around Copper or PVC Lines
- Stabilizing Pipe Insulation
|
Pool and Spa
- Sound Dampening
- Insulation/Insulation Repair
|
Theatrical
- Stage & Movie Sets
- Floats
- Special Effects
|
Roofing
- Filling Pitch Pockets
- Air-sealing Roof/Walls Joints
- Air-seal around HVAC Penetrations
- Fabricate On-site Cant Strips
- Level Low Ponding Water Areas on Roof Deck
- Repair Spray-applied Polyurethane Roofs (Froth-Pak 115 Kit - 2.75# density)
|
Transportation Vehicles
- Insulation
- Sound Dampening
- Structural Support
- Vibration Control
- Sealing - Air, Water, Dust
- Surface Protection
- Flotation
|
Worldwide Uses(23KB PDF)
Find additional FROTH-PAK application ideas
|
FROTH-PAK can be used in either interior or exterior industrial, commercial, institutional and residential settings.
If used in an exterior setting, a coating must be applied for UV protection.
Product Information
| Product | Part Number | Foam Density (Pcf) | Yield | Contents |
| FROTH-PAK 180 Kit | 157804 | 1.75 | 200 Board Feet
16.6 Cubic Feet |
- One Iso (A) cylinder; one Polyol (B) cylinder
- 9 ft. gun hose assembly (GHA)
- Six cone white spray (187918) 4 GG white spray (187915)
- One petroleum jelly packet
|
| FROTH-PAK 180 Kit | 157803 | 1.75 MSHA1 | 200 Board Feet
16.6 Cubic Feet |
- One Iso (A) cylinder; one Polyol (B) cylinder
- 9 ft. gun hose assembly (GHA)
- Six cone white spray (187918) 4 GG white spray (187915)
- One petroleum jelly packet
|
FROTH-PAK 180
Tank Only | 157805 | 1.75 | 200 Board Feet
16.6 Cubic Feet |
One A cylinder; one B cylinder |
|
Dow FROTH-PAK™ 180 Kit - W-FRPK180 - Secure Shop Online
Product Info
