TILE BOND™
Dow TILE BOND™ 23 lb Canister Kit - DOW-157849
Dow TILE BOND™ 23 lb TANK ONLY - DOW-157957
Dow TILE BOND™ 20 oz can - DOW-157956
Contact Us for Pricing Quote - 800.937.9021 Ext-106 
Setting a New Standard for Roof Tile Installation
TILE BOND™ roof tile adhesive is a single-component polyurethane adhesive for attachment of concrete and clay roof tiles.
Because it is easy to work with and reduces tile breakage and materials, TILE BOND™ cuts installation time and labor costs compared to old traditional methods.
Furthermore, TILE BOND™ provides greater attachment strength, minimizes nail penetrations, and reduces roof weight loads.
Superior dispensing equipment supplies the adhesives in a highly consistent manner and eliminates the need for expensive heavy equipment.
TILE BOND™ adhesive is used to install most low/flat, medium, high and two-piece barrel (cap and pan) profiles of roof tile in new and re-roof applications.
TILE BOND™ is Miami-Dade Approved Acceptance: # 01-1011.01, SBCCI Listed Evaluation Report #2201,
meets South Florida Building Code-Broward County 1999 Edition,
Florida Building Code/International Code Council (ICC) Report Number: Application #FL717,
UL Class 1 listed (ASTM E 84), Class A Rated (ASTM E 108), and the Wisconsin Department of Commerce Approval # 970107-0.
TILE BOND™ must be applied to an underlayment installed in compliance with application instructions detailed in the following documents:
- FRSA/Roof Tile Institute Adhesive Set Tile Specification "System #4"
- Chapter 15 of the Standard Building Code
- Chapter 34 of the South Florida Building Code-Broward Edition
- Metro-Dade County RAS 140
TILE BOND™ meets or exceeds the minimum design wind pressure criteria of the Texas Department of Insurance when installed with Product Evaluation Report RC-28.
- Fast
- Hassle-free
- Lightweight
- Convenient
- Hurricane-proven: Approval for 140 mph wind uplift resistance
- Metro-Dade approved
TILE BOND™ cuts installation time and labor costs compared to traditional methods.
Furthermore, TILE BOND™ provides greater attachment strength, minimizes nail penetrations, and reduces roof weight loads.
Superior dispensing equipment supplies the adhesives in a highly consistent manner and eliminates the need for expensive heavy equipment.
| Advantages of TILE BOND™ adhesive vs. | Screws | Mortar | Two-component
Foam | Wire Ties |
| Reduces labor costs | x | x | x | x |
| Portable, easy to handle | | x | x | x |
| No investment in heavy equipment | | x | x | |
| No equipment malfunction downtime | | | x | |
| No equipment clean-up/maintenance | | x | x | |
| Superior attachment strength compared with traditional methods | x | x | | x |
| No capital investment in dispensing equipment | | | x | |
| Reduces tile breakage/material costs | x | | | x |
| Minimizes roof deck penetrations | x | | | x |
| May eliminate nailing on roofs with pitches up to 6:12 | x | | | |
| Easier to use than other methods | x | x | x | x |
| Dispenses consistent quality adhesive | | | x | |
| Lightweight material reduces roof load | | x | | |
| No external power source required | | | x | |
| Not affected by changes in temperature | | x | x | |
| Product | Size | Part Number | Contents | Code Approvals |
| TILE BOND™ | 23 lb canister | 157849 |
- One canister of adhesive
- One hose
- One wand
- One coupler
- One valve
- One wrench
- Instructions
|
Metro-Dade
Notice of Acceptance
No.: 01-1011.01
Expires 08/23/2006
SBCCI
PST&ESI
Evaluation Report #2201
South Florida
Building Code
Broward County
1999 Edition
UL Classified
Class 1 Listed
(ASTM E 84)
|
TILE BOND™
Tank Only | 23 lb canister | 157957 |
- One canister of adhesive
- Instructions
|
| TILE BOND™ | 20 oz can | 157956 |
- One canister of adhesive
- One dispensing straw
|
|
Product Info
