GRX1200 Series
The Leica GRX1200 Series, part of Leica's new System 1200, is designed specifically for use at reference stations.
With these new receivers, GNSS reference stations become more accurate, more powerful, more versatile and more reliable than ever before, yet they are easier to set up and operate.
SmartTrack+ Best GNSS and RTK technology
The Leica GRX1200 Series incorporates an ultra-precise GNSS (Global Navigation Satellite System) measurement engine that supports both GPS and GLONASS -
benefit from up to 100 % more satellites than GPS alone.
- Acquisition within seconds
- Excellent signal strength
- Reliable tracking to low elevations
- Suppresses phase and code multipath
- Jamming resistant
- Top quality GPS and GLONASS measurements up to 20 Hz
- Totally reliable
- Low power consumption
The Leica GRX1200 Series delivers uncorrelated data of the highest quality under all conditions making them ideal for all reference station applications.
As the GRX1200 Series with SmartTrack+ is designed to support future GNSS signals such as GPS L5 and Galileo, your system investment is secure.
RTK and DGPS output
The Leica GRX1200 Series provides all the information required for precise surveying with all types of RTK and GIS rovers.
They output RTK and DGPS data for transmission from the site by radio or phone, or for distribution from a control center by radio, phone or Internet.
RTCM, LEICA proprietary, CMR and CMR+ formats are supported.
The GRX1200 Series receivers can carry out many operations simultaneously.
Data files can be downloaded while the receiver continues to track and log data and while it is streaming raw data and transmitting RTK, DGPS or BINEX data.
The GRX1200 Series are true multi-tasking receivers.
Web interface
Use a web browser to conveniently monitor and control your GRX1200 receiver from any computer hooked up in the same network or via the Internet.
Or use the browser to pre-configure the receiver for connections with GPS Spider software.
The GRX1200 web interface provides highest flexibility, yet uses the latest web security technologies.
Simple and robust data management
Removable and robust industrial grade CompactFlash cards up to 1 GB are used for logging data, where 1 GB is sufficient for about 7 weeks of 1 Hz L1+L2 GPS data.
There is no need for power-consuming external memory storage, which typically cannot fulfill the tough environmental conditions to which reference stations can be exposed.
The memory can be split into primary and ring buffer files for logging at different rates and in files of any length. Files can be logged in raw data and/or RINEX format.
Built-in FTP services
The receiver has an in-built FTP server, allowing simple and quick manual download of data without the need for special software.
Or use the FTP Push, a fully automatic upload of data from the receiver to a remote FTP server.
Benefits
- High Accuracy Data
- Tracking up to 20Hz
- Low power consumption
- Removable Memory
- Simple Configuration
- Web Enabled
Leica GNSS technology (GPS and GLONASS)
Add additional GLONASS satellites to the world's best-performing GPS reference station systems.
Track all available GNSS signals now. An upgrade to GPS L5 and Galileo will be readily available as these systems become operational.
Leica Geosystems GPS solutions proven reliability rises to the next level with full GNSS support to deliver unmatched results with SmartTrack+ and SmartCheck+.
Leica SmartRTK: Always in focus
Users of GNSS Reference Station Networks expect their results to be consistent throughout the complete Network,
but often they're unaware that virtually computed Reference Stations compromise consistency.
Only with Leica Geosystems ingenious SmartRTK can you be sure that you're getting the best performance of your complete GNSS system.
Even the new RTCM 3.1 International standard now includes correction data designed by Leica Geosystems to ensure that the results are consistent and traceable anywhere in the network.
And the new atmospheric decorrelator technology provides precise positioning in all Networks regardless of the correction data.
GRX1200 Series - Technical Data
| GNSS Technology |
| GRX1200 GG Pro | SmartTrack+, 14L1 + 14L2 GPS, 12L1 + 12L2 GLONASS, 20Hz, L1C/A, L2P, L2C code |
| GRX1200 Lite/Classic/Pro | SmartTrack, 12L1+12L2 GPS, 20 Hz, L1C/A, L2P code |
|
SmartTrack Advanced GPS measurement technology | Time needed to acquire all satellites after switching on: typically 30 seconds.
Re-acquisition of satellites after loss of lock: typically within 1 second.
Very high sensitivity: acquires more than 99% of all possible observations above 10 degrees elevation.
Very low signal noise. Robust tracking.
Tracks weak signals to low elevations and in adverse conditions.
Multipath mitigation. Jamming resistant. |
|
| Measurement precision: |
| Carrier phase | L1: 0.2 mm rms L2: 0.2 mm rms |
| Code (pseudo-range) | L1: 20 mm rms L2: 20 mm rms |
|
| Status indicators | 3 LED indicators for power, tracking and memory. |
|
| Web & FTP Services | Control and configuration of the receiver over a web browser through Ethernet or Serial PPP. |
| Security by SSL and access management. |
| FTP access to receiver memory, FTP push*, Email notification. |
|
| Optional Control software | LEICA GPS Spider. |
| For managing single stations and RTK networks. |
|
| Weight | 1.2 kg |
|
| Temperature range | ISO9022, MIL-STD-810F |
| Operating | -40° C to + 65° C |
| Storage | -40° C to + 80° C |
|
| Humidity | ISO9022, MIL-STD-810F Up to 100% |
|
| Waterproof | MIL-STD-810F Temporary submersion to 1 m |
|
| Rain, dust, sand, wind | MIL-STD-810F, IP67/IP57 Sealed against wind blown rain, sand, and dust |
|
| Shock / drop onto hard surface | Withstand 1.0 m drop |
|
| Vibrations | ISO9022, MIL-STD-810F Withstand vibrations, no loss of lock |
|
| Supply voltage | Nominal 12 V DC |
| External power input | 10.5 V to 28 V DC |
| 2 power ports | 1 primary, 1 back-up |
|
| GRX1200 Lite | GRX1200 Classic | GRX1200 Pro/GG Pro |
| Power consumption | 4.0 W | 4.0 W | 3.6 W |
| Ports |
| External power | 2 | 2 | 2 |
| Serial | 4 | 4 | 4 |
| Antenna | 1 | 1 | 1 |
| For optional Controller | 1 | 1 | 1 |
| Ethernet | - | - | 1 |
| PPS output | - | - | 1 |
| Event input | - | - | 1 |
| External oscillator | - | - | 1 |
|
| Raw data logging | - | x | x |
| Onboard RINEX logging* | - | x | x |
|
| Data streaming |
| RTK and DGPS |
| Leica for SmartStation | x | x | x |
| Leica, CMR, CMR+ | - | x | x |
| RTCM v2.1/2.2/2.3/3.0 | - | x | x |
| Other data |
| Leica LB2 raw data | x | x | x |
| BINEX | x | x | x |
| NMEA 0183 | x | x | x |
| NTRIP |
| Integrated NTRIP server | - | - | x |
|
| Simultaneous RTK transmission | From 2 ports, identical or different formats |
*Optional
|
Secure Shop Online
Or contact us for pricing options and packages at 800.220.7206
DOWNLOADS
|